TM 9--2350--292--20--1
WIRING HARNESS AND CABLE REPAIR -- CONTINUED
0290 00
CONNECTOR REPAIR INSTRUCTIONS FOR CONNECTOR 12477603
Disassembly
1. Unscrew retaining plug (1) and slide plug (1), washer (2) and rubber gaskets (3 and 4) back about 6 inches on the
cable lead.
2. Remove screw (5) and nut (6).
3. Slide connector body (7) out of connector housing (8) until terminals are exposed.
4. Remove screw (9) and washer (10) to remove connector leads.
Assembly
1. Install connector leads on terminals with washer (10) and screw (9).
2. Slide terminals into connector body (7) and secure connector body to connector housing with screw (5) and nut
(6).
3. Slide cable leads into rubber gaskets (3 and 4) and install washer (2) into retaining plug (1).
5
8
9
10
6
7
4
3
2
1
END OF TASK
0290 00--11/12 blank