TM 9--2350--292--20--1
0290 00--4
WIRING HARNESS AND CABLE REPAIR -- CONTINUED
0290 00
MALE CABLE CONNECTOR WITH WASHER
Disassembly
Cut and discard connector.
Assembly
1. Strip cable insulation equal to depth of terminal (1) well.
2. Slide shell (2) over cable (3).
3. Insert cable (3) into terminal (1) well and crimp.
4. Place C--washer (4) over cable (3) at crimped junction and slide shell (2) over C--washer (4) and terminal (1).
1
2
3
4
FEMALE CABLE CONNECTOR WITH SLEEVE
Disassembly
Cut and discard connector.
Assembly
1. Strip cable insulation approximately 1/8 inch (3.2 mm).
2. Slide shell (1) and sleeve (2) over cable (3).
3. Place cable (3) in cylinder end of terminal (4) and crimp.
4. Slide shell (1) and sleeve (2) over terminal (4).
1
2
4
3
