SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC SELECTOR SET IN MAIN POSITION (cont)

SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC SELECTOR SET IN MAIN POSITION (cont) - TM-9-2350-292-20-1_418

SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC SELECTOR SET IN AUXILIARY POSITION (cont) - TM-9-2350-292-20-1_420

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
375

TM 9--2350--292--20--1 SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC SELECTOR SET IN MAIN POSITION -- CONTINUED 0089 00 Y Are plugs, ports, and hoses free of leaks, restrictions, and damage? CONTINUED FROM STEP X no yes 1. Remove hoist and main winch directional control valve assembly (WP 0556 00). 2. Inspect load sense shuttle plugs in hoist and main winch directional control valve assembly, ports LS, LS1, LS2, and all attaching hoses for leaks, restrictions, and damage. Tighten leaking connec- tions and remove re- strictions. If restrictions cannot be removed, or if parts are damaged, re- place (WP 0573 00). Verify fault is corrected. Notify Direct Support Maintenance. END OF TASK 0089 00--13/14 blank

Privacy Statement
Press Release
Contact