SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC SELECTOR SET IN AUXILIARY POSITION (cont)

SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC SELECTOR SET IN AUXILIARY POSITION (cont) - TM-9-2350-292-20-1_423

SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC SELECTOR SET IN AUXILIARY POSITION (cont) - TM-9-2350-292-20-1_425

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
380

TM 9--2350--292--20--1 0090 00--5 SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC SELECTOR SET IN AUXILIARY POSITION -- CONTINUED 0090 00 CONTINUED FROM STEP I J Are all hoses and quick--disconnects free of restrictions, damage and loose hardware? no yes 1. Unplug hoses and manifold and reconnect hoses to AUX and FT ports on manifold. 2. Open right side air intake grilles and refuel/defuel compartment. 3. Inspect auxiliary hoses, fuel transfer pump hoses and impact wrench pressure quick--disconnect for restrictions and leaks caused by damage or loose hardware. Remove restrictions and tighten loose hardware. Replace damaged parts (WP 0566 00). Verify fault is corrected. Fault corrected. If an auxiliary component fails to operate, go to Quick Guide and find appropriate trouble- shooting. FORWARD CONTINUED ON NEXT PAGE WARNING

Privacy Statement
Press Release
Contact