TM 9--2350--292--20--1
0091 00--1
MAIN WINCH FAILS TO OPERATE OR FAILS TO DEVELOP FULL POWER.
0091 00
THIS WORK PACKAGE COVERS:
Main Winch Fails To Operate Or Fails To Develop Full Power
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
0--5000 psi dial pressure gauge (2) (item 83, WP
0717 00)*
0--4000 psi testing gauge assembly (3)
(item 82, WP 0717 00)*
1/4--inch tee (2) (item 71, WP 0716 00)*
3/8--inch tee (item 72, WP 0716 00)*
1/4--inch cap (item 44, WP 0716 00)
1/4--inch plug (item 67, WP 0716 00)
Safety goggles (item 93, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Subfloor plates 9, 10, 11, 12, 15, 18, 20 and 22
removed (WP 0454 00)
Personnel Required
Two
* Not required if vehicle is equipped with Enhanced
Diagnostics System
CONTINUED ON NEXT PAGE
Are all hoses and quick--disconnects free of restrictions,
damage, and are they properly connected?
Inspect main winch hoses and quick--disconnects
for proper connection, restrictions, and damage.
no
yes
A
If quick--disconnects are not prop-
erly connected, connect properly.
Remove any restrictions found in
hoses. If restrictions cannot be re-
moved or if quick--disconnects or
hoses are damaged, replace (WP
0500 00). Verify fault is corrected.
WARNING
WARNING
Remove rings, bracelets, wristwatches, and
neck chains before working on any vehicle.
Jewelry can catch on equipment and cause
injury, or may short across an electrical circuit
and cause severe burns or electrical shock.
