TM 9--2350--292--20--10092 00--5MAIN WINCH CREEPS WITH CONTROL IN NEUTRAL -- CONTINUED0092 00Hnoyes1. Start main engine, energize hydraulics, andset engine speed to 1800 rpm(TM 9--2350--292--10).2. Record pressures at hydraulic control valvemanifold ports PMO and PMI.3. Shut down hydraulics and main engine(TM 9--2350--292--10).Inoyes1. Remove hydraulic control valve manifoldassembly shields (WP 0519 00).2. Inspect pilot valves and hoses from ports PMOand PMI of hydraulic control valve manifoldassembly to hoist and main winch directionalcontrol valve assembly ports PMO and PMIand return line from tee between main winchsafety level valves to reservoir for restrictionsand damage.Remove restrictions. Ifrestrictions cannot be removed,or if hoses are damaged, replace(WP 0573 00). Verify fault iscorrected.Are all hoses free of restrictions and damage?Notify Direct SupportMaintenance.Are both pressures less than 50 psi?CONTINUEDFROMSTEPSFANDGFault corrected.FORWARDFORWARDEND OF TASK0092 00--5/6 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business