TM 9--2350--292--20--1
0100 00--1
HOIST WINCH FAILS TO OPERATE OR DEVELOP FULL POWER.
0100 00
THIS WORK PACKAGE COVERS:
Hiost Winch Fails To Operate Or Develop Full Power
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
0--5000 psi dial pressure gauge (2)
(item 83, WP 0717 00)*
0--4000 psi testing gauge assembly (2)
(item 82, WP 0717 00)
1/4--inch tee (2) (item 71, WP 0716 00)
3/8--inch tee (item 72, WP 0716 00)
1--inch flange plug with o--ring (2)
(item 76, WP 0716 00)
Safety goggles (item 93, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Boom derigged (TM 9--2350--292--10)
Personnel Required
Two
*Not required if vehicle is equipped with Enhanced
Diagnostic System.
Do boom pulleys freely rotate?
Check to ensure boom pulleys freely rotate on
their shaft.
no
yes
no
yes
A
B
CONTINUED ON NEXT PAGE
Remove stayline cables, shaft, pulleys, and
spacers from boom (WP 0524 00) and inspect
them for binding and damage.
Are all parts free of binding and damage?
Go to Step C.
Repair or replace binding and/or
damaged parts (WP 0524 00).
Verify fault is corrected.
WARNING
WARNING
Remove rings, bracelets, wristwatches, and
neck chains before working on any vehicle.
Jewelry can catch on equipment and cause
injury, or may short across an electrical circuit
and cause severe burns or electrical shock.