TM 9--2350--292--20--1
0111 00--1
ONE OR BOTH WINCH LIGHTS FAIL TO OPERATE.
0111 00
THIS WORK PACKAGE COVERS:
One Or both Winch Lghts Fail To Operate
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Subfloor plates 4 and 18 removed (WP 0454 00)
Personnel Required
Two
Is 24 V dc present?
1. Disconnect lead 518 from both winch lights.
2. Turn MASTER switch and WINCH LT switch
ON (TM 9--2350--292--10).
3. Place multimeter red lead in each lead 518
connector socket (one at a time) and black lead
to ground. Check for voltage.
4. Turn MASTER switch and WINCH LT switch
OFF (TM 9--2350--292--10).
no
yes
Replace faulty winch
light (WP 0282 00).
Verify fault is corrected.
A
CONTINUED ON NEXT PAGE
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
