TM 9--2350--292--20--1
0111 00--2
ONE OR BOTH WINCH LIGHTS FAIL TO OPERATE -- CONTINUED
0111 00
CONTINUED FROM STEP A
no
yes
Repair (WP 0290 00) or
replace (WP 0244 00)
lead 518. Verify fault is
corrected.
B
1. Remove accessory panel (WP 0244 00).
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Place multimeter red lead on terminal 2 of
switch S1 lead 518 connector and black lead to
ground. Check for voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
Is 24 V dc present?
no
yes
Replace switch S1
(WP 0244 00). Verify
fault is corrected.
C 1. Turn WINCH LIGHT switch ON
(TM 9--2350--292--10).
2. Place one multimeter lead on each switch S1
connector. Check for continuity.
Is continuity present?
CONTINUED ON NEXT PAGE