NO POWER AT SLAVE RECEPTACLE

NO POWER WHEN MASTER SWITCH IS TURNED ON (cont) - TM-9-2350-292-20-1_628

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
585

TM 9--2350--292--20--1 0127 00--1 NO POWER AT SLAVE RECEPTACLE. 0127 00 THIS WORK PACKAGE COVERS: No Power At Slave Receptacle INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Multimeter (item 84, WP 0717 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Batteries in good condition Personnel Required Two Is 24 V dc present? Place multimeter red lead on NATO receptacle positive terminal and black lead to ground. Check for voltage. no yes no yes A B WARNING Contact of jewelry, metal tools and equip- ment between positive terminal and vehicle ground can result in short circuiting and even battery explosion which can cause severe burns or death. Place one multimeter lead on receptacle negative terminal and other lead to ground. Check for conti- nuity. Is continuity present? WARNING Remove rings, bracelets, wristwatches, and neck chains before working on any vehicle. Jewelry can catch on equip- ment and cause injury, or may short across an electrical circuit and cause severe burns or electrical shock. Go to Step C. Repair (WP 0290 00) or replace (WP 0307 00) lead 50. Verify fault is corrected. Replace slave recep- tacle (WP 0307 00). Verify fault is corrected. CONTINUED ON NEXT PAGE

Privacy Statement
Press Release
Contact