NO POWER WHEN MASTER SWITCH IS TURNED ON (cont)

NO POWER WHEN MASTER SWITCH IS TURNED ON (cont) - TM-9-2350-292-20-1_623

NO POWER WHEN MASTER SWITCH IS TURNED ON (cont) - TM-9-2350-292-20-1_625

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
580

TM 9--2350--292--20--1 0126 00--7 NO POWER WHEN MASTER SWITCH IS TURNED ON -- CONTINUED 0126 00 no yes L 1. Reconnect lead 400/459B to 30--amp circuit breaker. 2. Open air intake grilles above battery compartment (TM 9--2350--292--10). 3. Disconnect harness 3W142 P1 from bulkhead disconnect. 4. Place multimeter red lead in harness 3W142 P1 socket G and F (one at a time) while holding black lead to ground. Check for voltage. Is 24 V dc present at both checks? CONTINUED FROM STEP K Repair (WP 0290 00) or replace (WP 0294 00) harness 3W142. Verify fault is corrected. CONTINUED ON NEXT PAGE Repair (WP 0290 00) or replace (WP 0324 00) harness 4W127. Verify fault is corrected.

Privacy Statement
Press Release
Contact