NO POWER WHEN MASTER SWITCH IS TURNED ON (cont)

NO POWER WHEN MASTER SWITCH IS TURNED ON (cont) - TM-9-2350-292-20-1_624

NO POWER WHEN MASTER SWITCH IS TURNED ON (cont) - TM-9-2350-292-20-1_626

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
581

TM 9--2350--292--20--1 0126 00--8 NO POWER WHEN MASTER SWITCH IS TURNED ON -- CONTINUED 0126 00 no yes M 1. Remove switch panel from vehicle (WP 0242 00). 2. Turn MASTER switch ON (TM 9--2350--292--10). 3. Place one multimeter lead on harness 4W151 J2 pin F and other lead on pin G. Check for continuity. Is continuity present? CONTINUED FROM STEP J Go to Step P. N 1. Disconnect lead 459B from switch S1. 2. Place one multimeter lead on harness 4W151 J2 pin G and other lead in lead 459B MASTER switch connector socket. Check for continuity. Is continuity present? no yes Repair (WP 0290 00) or replace (WP 0242 00) harness 4W151. Verify fault is corrected. CONTINUED ON NEXT PAGE

Privacy Statement
Press Release
Contact