NO POWER WHEN MASTER SWITCH IS TURNED ON (cont)

NO POWER WHEN MASTER SWITCH IS TURNED ON (cont) - TM-9-2350-292-20-1_626

NO POWER WHEN MASTER SWITCH IS TURNED ON (cont) - TM-9-2350-292-20-1_628

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
583

TM 9--2350--292--20--1 0126 00--10 NO POWER WHEN MASTER SWITCH IS TURNED ON -- CONTINUED 0126 00 no yes Q Is 24 V dc present? CONTINUED FROM STEP P CONTINUED ON NEXT PAGE Repair (WP 0290 00) or replace (WP 0294 00) harness 3W142. Verify fault is corrected. 1. Reinstall switch panel (WP 0242 00). 2. Reconnect harness 3W142 P1 to bulkhead disconnect. 3. Disconnect harness 3W142 lead 459 from master relay. 4. Turn MASTER switch ON (TM 9--2350--292--10). 5. Place multimeter red lead on harness 3W142 lead 459 master relay connector and black lead to ground. Check for voltage. 6. Turn MASTER switch OFF (TM 9--2350--292--10).

Privacy Statement
Press Release
Contact