NO POWER WHEN MASTER SWITCH IS TURNED ON (cont)

NO POWER WHEN MASTER SWITCH IS TURNED ON (cont) - TM-9-2350-292-20-1_622

NO POWER WHEN MASTER SWITCH IS TURNED ON (cont) - TM-9-2350-292-20-1_624

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
579

TM 9--2350--292--20--1 0126 00--6 NO POWER WHEN MASTER SWITCH IS TURNED ON -- CONTINUED 0126 00 no yes J K 1. Remove switch panel from bracket (WP 0242 00) and reconnect ground strap to switch panel. 2. Disconnect harness 4W127 P2 from switch panel. 3. Place multimeter red lead in harness 4W127 P2 socket G and black lead to ground. Check for voltage. Is 24 V dc present? Is 24 V dc present? CONTINUED FROM STEPS F AND I no yes 1. Disconnect harness 3W218 lead 400/459B from 30--amp circuit breaker. 2. Place multimeter red lead in lead 400/459B circuit breaker connector socket and black lead to ground. Check for voltage. Go to Step M. Repair (WP 0290 00) or replace (WP 0310 00 ) harness 3W218. Verify fault is corrected. CONTINUED ON NEXT PAGE

Privacy Statement
Press Release
Contact