TM 9--2350--292--20--10129 00--9FUEL GAUGE FAILS TO OPERATE PROPERLY -- CONTINUED0129 00NIs continuity present?CONTINUED FROM STEP MnoyesCONTINUED ON NEXT PAGE1. Reconnect lead 30 to switch S4.2. Open subfloor plate 20 (WP 0454 00).3. Disconnect lead 30 from liquid level transmitter.4. Place one multimeter lead in harness 4W103P1 socket M and other lead in lead 30 liquidlevel transmitter connector socket. Check forcontinuity.Repair (WP 0290 00) orreplace (WP 0316 00)harness 4W103. Verifyfault is corrected.ODoes fuel gauge show proper reading?noyes1. Reconnect lead 30 to liquid level transmitter.2. Reconnect harness 4W103 P1 to gauge panel.3. Turn MASTER switch ON(TM 9--2350--292--10).4. Turn MASTER switch OFF(TM 9--2350--292--10).Replace liquid level trans-mitter (WP 0215 00).Verify fault is corrected.PIs continuity present?noyes1. Disconnect leads 28 and 31 from switch S4.2. Turn selector switch to REAR position(TM 9--2350--292--10).3. Place one multimeter lead on each switch S4connector pin. Check for continuity.Replace switch S4(WP 0243 00). Verifyfault is corrected.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business