MAIN WINCH FAILS TO SHUT DOWN DURING A MALFUNCTION (cont)

MAIN WINCH FAILS TO SHUT DOWN DURING A MALFUNCTION (cont) - TM-9-2350-292-20-1_805

MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
762

TM 9--2350--292--20--1 0182 00--4 MAIN WINCH FAILS TO SHUT DOWN DURING MALFUNCTION -- CONTINUED 0182 00 G Is 24 V dc present at both checks? CONTINUED FROM STEP D no yes 1. Remove subfloor plate 18 (WP 0454 00). 2. Disconnect harness 2W612 connectors P1 and P2 from main winch power reduction manifold. 3. Turn MASTER switch ON and hold WINCH TEST switch in the TEST position (TM 9--2350--292--10). 4. Place multimeter red lead on harness 2W612 connectors P1 and P2 socket 1 (one at a time) and black lead to ground. Check for voltage. 5. Turn MASTER switch OFF (TM 9--2350--292--10). Repair (WP 0290 00) or replace (WP 0292 01) harness 2W612. Verify fault is corrected. H Is continuity present at both checks? no yes Place one multimeter lead on wiring harness 2W612 connectors P1 and P2 socket 2 (one at a time) and other lead to ground. Check continuity. Repair (WP 0290 00) or replace wiring harness 2W612 (WP 0292 01). Verify fault is corrected. Replace main winch power reduction man- ifold (WP 0557 00). Verify fault is cor- rected. FORWARD END OF TASK

Privacy Statement
Press Release
Contact