MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION (cont)

MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION

MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION (cont) - TM-9-2350-292-20-1_809

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
764

TM 9--2350--292--20--1 0183 00--2 MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION -- CONTINUED 0183 00 D Is continuity present? CONTINUED FROM STEP C no yes CONTINUED ON NEXT PAGE 1. Disconnect harness 4W618 P1 from accessory control panel. 2. Place one multimeter lead in harness 4W618 P1 socket 9 and other lead on harness 4W618 P2 pin H. Check for continuity. Repair (WP 0290 00) or replace (WP 0331 00) harness 4W618. Verify fault is corrected. E Is continuity present? no yes 1. Disconnect harness 4W617 lead 359 from winch test switch. 2. Place one multimeter lead in harness 4W617 J1 socket J and other lead in lead 359 switch connector socket. Check for continuity. Repair (WP 0290 00) or replace (WP 0330 00) harness 4W617. Verify fault is corrected. no yes Repair (WP 0290 00) or replace (WP 0331 00) harness 4W618. Verify fault is corrected.

Privacy Statement
Press Release
Contact