MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION (cont)

MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION (cont) - TM-9-2350-292-20-1_808

MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION (cont) - TM-9-2350-292-20-1_810

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
765

TM 9--2350--292--20--1 0183 00--3 MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION -- CONTINUED 0183 00 F Is continuity present? CONTINUED FROM STEP E no yes CONTINUED ON NEXT PAGE Place one multimeter lead on each connector pin of WINCH TEST switch and hold switch in TEST position. Check for continuity. Replace WINCH TEST switch (WP 0245 00). Verify fault is corrected. G Is continuity present? no yes 1. Disconnect harness 4W617 lead 359 from WINCH OVERRIDE switch. 2. Place one multimeter lead in harness 4W617 lead 359 WINCH TEST switch connector socket and other lead on harness 4W617 lead 359 WINCH OVERRIDE switch connector pin. Check for continuity. Repair (WP 0290 00) or replace (WP 0330 00) harness 4W617. Verify fault is corrected. Go to Step I.

Privacy Statement
Press Release
Contact