MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION (cont)

MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION (cont) - TM-9-2350-292-20-1_810

MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION (cont) - TM-9-2350-292-20-1_812

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
767

TM 9--2350--292--20--1 0183 00--5 MAIN WINCH FAILS TO SHUT DOWN WHEN WINCH TEST SWITCH IS HELD IN TEST POSITION -- CONTINUED 0183 00 CONTINUED ON NEXT PAGE J Is continuity present? no yes 1. Disconnect harness 4W618 P2 from harness 4W617 J1. 2. Place one multimeter lead on harness 4W617 lead 359B connector terminal to WINCH OVERRIDE switch and other lead on harness 4W617 J1 socket D. Check for continuity. Repair (WP 0290 00) or replace (WP 0330 00) harness 4W617. Verify fault is corrected. CONTINUED FROM STEP I K Is continuity present? no yes 1. Open accessory control panel (WP 0290 00). 2. Disconnect harness 4W618 P1 from accessory control panel. 3. Place one multimeter lead on harness 4W618 P2 pin D and other lead on harness 4W618 P1 socket 7. Check for continuity. Repair (WP 0290 00) or replace (WP 0331 00) harness 4W618. Verify fault is corrected.

Privacy Statement
Press Release
Contact