MAIN WINCH DOES NOT OPERATE WITH THE OVERRIDE SWITCH HELD IN THE OVERRIDE POSITION (cont)

MAIN WINCH DOES NOT OPERATE WITH THE OVERRIDE SWITCH HELD IN THE OVERRIDE POSITION

MAIN WINCH POWER IS NOT REDUCED WHEN OVERRIDE SWITCH IS IN OVERRIDE POSITION

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
773

TM 9--2350--292--20--1 0184 00--2 MAIN WINCH DOES NOT OPERATE WITH THE OVERRIDE SWITCH HELD IN THE OVERRIDE POSITION -- CONTINUED 0184 00 Does main winch operate with control lever in either position? 1. Hold WINCH OVERRIDE switch in the OVERRIDE position. 2. Alternate position of MAIN WINCH control lever between INHAUL and PAYOUT while watching main winch. no yes Place MAIN WINCH control lever in the INHAUL position and watch main winch. Does main winch operate with control lever in INHAUL position? Replace WINCH OVERRIDE switch (WP 0245 00). Verify fault is corrected. yes no Replace main winch payin safety valve (WP 0549 00). Verify fault is corrected. Replace main winch payout safety (WP 0549 00). Verify fault is corrected. B C CONTINUED FROM STEP A END OF TASK

Privacy Statement
Press Release
Contact