TM 9--2350--292--20--2
0622 00--2
AUXILIARY POWER UNIT ENGINE DUCT REPLACEMENT -- CONTINUED
0622 00
Installation
1. Thread wires (5 and 9) through duct (6) and grommet (12). Attach duct (6) to APU engine (2) with four screws
(11). Install grommet (12) in duct (6).
2. Secure duct (6) to back side of APU engine (2) with screw (7) and washer (8).
3. Connect wire (5) to top side of duct (6) with screw (3) and washer (4).
4. Connect wire (9) to lead connector (10).
5. Apply sealing compound to threads of exhaust elbow (1).
6. Install exhaust elbow (1) in exhaust manifold of APU engine (2).
Figure 340
2
6
1
8
7
9
10
12
11
5
3
4
APU SHOWN
REMOVED FOR
CLARITY
NOTE
FOLLOW--ON MAINTENANCE:
Install APU ducting (WP 0620 00)
Install APU cover (WP 0413 00)
END OF TASK