TM 9--2350--292--20--2
0670 00--1
EXHAUST SMOKE GENERATING SYSTEM FUEL SHUTOFF VALVE,
SOLENOID VALVE AND RELATED PARTS REPLACEMENT
0670 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Torque wrench (item 21, WP 0717 00)
Wire twister pliers (item 67, WP 0717 00)
Materials/Parts
Lockwashers (2) (item 18, WP 0718 00)
Assembled--washer screws (2) (item 418,
WP 0718 00)
Nonelectrical wire (item 349, WP 0718 00)
Safety goggles (item 93, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Engine deck assembly removed (WP 0417 00)
References
TM 9--2350--292--10
Removal
WARNING
1. Disconnect wiring harness 3W202 connector (1) from receptacle on solenoid valve (2).
2. Remove fuel tube assembly (3) from tee (4) and adapter (5).
3. Remove adapter (5) from fuel shutoff valve (6).
4. Remove fuel tube assembly (7) from elbow (8).
5. Remove two screws (9), two lockwashers (10), two flat washers (11) and solenoid valve assembly (12) from
bracket (13). Discard lockwashers.
Figure 362
7
13
11
10
9
5
4
3
1
POWERPACK
REMOVED FOR CLARITY
2
8
6
12
