TM 9--2350--292--20--2
0671 00--3
SMOKE GRENADE LAUNCHER ARMING SWITCH BOX AND LAMP
ASSEMBLY REPAIR -- CONTINUED
0671 00
Disassembly
1. Remove four screws (12) and four lockwashers (13) from wiring harness 4W150 connector J1 (14). Discard lock-
washers.
2. Disconnect two wires 4W150 SW (15 and 16) from toggle switch (17).
3. Remove screw (18), two lockwashers (19) and wire 4W150 GND (20). Discard lockwashers.
4. Remove wiring harness 4W150 (14) from switch box assembly (2).
5. Remove two screws (21), guard (22) and toggle switch (17) from switch box assembly (2).
6. Remove four drive screws (23) and instruction plate (24) from switch box assembly (2). Discard drive screws.
7. Remove lamp (25) and gasket (26) from lamp assembly (7). Discard gasket.
8. Remove bondnut (27), lockwasher (28) and retaining strap (29) from lamp assembly (7). Discard lockwasher.
9. Inspect parts for damage and replace as required.
Figure 363
14
13
12
21
22
23
24
2
19
19
20
18
15
16
17
29
28
27
26
25
7
