Removal (cont) - TM-9-2350-292-20-2

BRAKE SHAFT ASSEMBLY 12364824 AND BRAKE PEDAL RETURN SPRING REPLACEMENT (OLD CONFIGURATION)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
101

TM 9--2350--292--20--2 0366 00--2 BRAKE SHAFT ASSEMBLY 12364824 AND BRAKE PEDAL RETURN SPRING REPLACEMENT (OLD CONFIGURATION) -- CONTINUED 0366 00 Removal--Continued NOTE Before removing rod assemblies, scribe positions on le- vers and rod assemblies to aid during installation. 4. Remove cotter pin (8), straight headed pin (9) and rod assembly (10) from lever (6). Discard cotter pin. 5. Remove cotter pin (11), straight headed pin (12) and rod assembly (13) from lever (14). Discard cotter pin. 6. Remove four screws (15), four flat washers (16), four lockwashers (17), two bearing housings (18) and shaft (19) from vehicle. Discard lockwashers. WARNING 7. Remove two retaining rings (20) and two levers (6 and 14) from shaft (19). Discard retaining rings. 8. Remove two lubrication fittings (21) from two bearing housings (18). 9. Loosen four set screws (22) on two bearing housings (18), remove shaft (19) 10. Inspect parts for damage and replace as required. Figure 170 11 12 13 20 14 22 18 22 18 20 6 10 8 9 16 15 17 21 22 19 16 17 15 21 22

Privacy Statement
Press Release
Contact