TM 9--2350--292--20--2
0367 00--2
BRAKE SHAFT ASSEMBLY 12364824 AND BRAKE PEDAL RETURN SPRING
REPLACEMENT (NEW CONFIGURATION WITH BRAKE MODULATION) --
CONTINUED
0367 00
Removal--Continued
NOTE
Before removing rod assemblies, scribe positions on le-
vers and rod assemblies to aid during installation.
4. Remove cotter pin (8), two washers (9), straight headed pin (10) and rod assembly (11) from lever (6). Discard
cotter pin.
5. Remove cotter pin (12), flat washer (13), straight headed pin (14) and rod assembly (15) from lever (16). Discard
cotter pin.
6. Remove four screws (17), four flat washers (18), four lockwashers (19), two bearing housings (20) and shaft (21)
from vehicle. Discard lockwashers.
WARNING
7. Remove two retaining rings (22) and two levers (6 and 16) from shaft (21). Discard retaining rings.
8. Remove two lubrication fittings (23) from two bearing housings (20).
9. Loosen four set screws (24) on two bearing housings (20), remove shaft (21)
10. Inspect parts for damage and replace as required.
6
8
22
10
9
11
9
20
21
23
18
19
17
15
14
12
22
16
20
24
18
19
17
24
13
23
