TM 9--2350--292--20--2
0368 00--1
BRAKE SHAFTS 12364630 AND 12364780 REPLACEMENT
0368 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Retaining pliers set (item 15, WP 0717 00)
Materials/Parts
Cotter pins (7) (item 17, WP 0718 00)
Lockwashers (8) (item 12, WP 0718 00)
Retaining rings (3) (item 354, WP 0718 00)
Retaining ring (item 355, WP 0718 00)
Lubricant (item 3, WP 0716 00)
Equipment Conditions
Vehicle parked on a level surface with tracks
blocked (TM 9--2350--292--10)
Powerpack removed (WP 0188 00)
References
TM 9--2350--292--10
NOTE
Disassemble equipment only to the extent necessary to
effect repairs.
Removal
1. Remove three cotter pins (1), three grooved headed pins (2) and plate (3) from brake cable (4) and two yokes (5).
Discard cotter pins.
2. Remove three lubrication fittings (6) from three grooved headed pins (2).
3. Remove two cotter pins (7), two straight headed pins (8) and two yokes (5) from two levers (9 and 10). Discard
cotter pins.
Figure 16
FORWARD
1
1
1
2
2
3
4
5
5
6
6
7
7
8
8
9
10
