BRAKE CABLE REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
113

TM 9--2350--292--20--2 0369 00--1 BRAKE CABLE REPLACEMENT 0369 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Torque wrench (item 2, WP 0717 00) Hand lubrication gun (item 13, WP 0717 00) Materials/Parts Cotter pin (item 17, WP 0718 00) Lockwashers (4) (item 9, WP 0718 00) Lockwashers (2) (item 27, WP 0718 00) Lubricant (item 3, WP 0716 00) Electrical tiedown strap (item 77, WP 0718 00) Equipment Conditions Vehicle parked on a level surface with tracks blocked (TM 9--2350--292--10) Powerpack removed (WP 0188 00) Subfloor plates #13, #16 and #20 removed (WP 0454 00) References TM 9--2350--292--10 Removal NOTE The brake cable replacement is the same procedure re- gardless of the braking system contained in the vehicle. This task shows the new configuration with brake modu- lation. 1. Remove cotter pin (1), straight headed pin with lubrication fitting (2) and brake cable assembly (3) from plate (4). Discard cotter pin. 2. Remove clevis (5) from brake cable assembly (3). 3. Remove nut (6) from brake cable assembly (3). 4. Remove two screws (7), two lockwashers (8) and two nuts (9) from brake cable assembly (3). Discard lockwash- ers. 5. Remove two screws (10), two lockwashers (11) and four flat washers (12) securing bracket (13) to hull. Discard lockwashers. 6. Slide bracket (13) off brake cable assembly (3). FORWARD 9 8 3 3 10 11 5 3 6 2 1 4 7 12 13

Privacy Statement
Press Release
Contact