Removal - TM-9-2350-292-20-2

BRAKE SHAFTS 12364630 AND 12364780 REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
109

TM 9--2350--292--20--2 0368 00--2 BRAKE SHAFTS 12364630 AND 12364780 REPLACEMENT -- CONTINUED 0368 00 Removal--Continued 4. Remove two cotter pins (11), two straight headed pins (12) and two rear brake rod assemblies (13) from two le- vers (14 and 15). Discard cotter pins. NOTE Quantity of shims may vary. Note quantity and location of shims removed to aid in installation. 5. Remove four screws (16), four lockwashers (17), shaft assembly (18), bearing housing (19) and shims (20) from support (21). Discard lockwashers. WARNING 6. Remove two retaining rings (22 and 23), two levers (9 and 14) and bearing housing (24) from shaft (25). Discard retaining rings. 7. Remove lubrication fitting (26) from shaft (25). Figure 169 26 22 14 16 17 24 25 9 23 12 11 13 20 18 21 16 17 19 20 12 11 13 15

Privacy Statement
Press Release
Contact