TM 9--2350--292--20--2
0368 00--4
BRAKE SHAFTS 12364630 AND 12364780 REPLACEMENT -- CONTINUED
0368 00
Installation
1. Install seven lubrication fittings (35) in four levers (9, 10, 14 and 15) and three bearing housings
(24 and 33).
WARNING
2. Install two bearing housings (33), two levers (10 and 15) and two new retaining rings (32) on shaft (34). Position
levers (10 and 15) on shaft (34) so holes in ends of levers align.
3. Install shims (30), shaft assembly (29), four new lockwashers (28) and four screws (27) on two supports (21 and
31).
4. Install lubrication fitting (26) in shaft (25).
5. Install bearing housing (24), two levers (9 and 14) and two new retaining rings (22 and 23) on shaft (25). Position
levers (9 and 14) on shaft (25) so holes in ends of levers align.
6. Install shims (20), bearing housing (19), shaft assembly (18), four new lockwashers (17) and four screws (16).
Figure 169
26
22
14
35
16
17
24
25
9
35
23
16
17
19
20
21
20
18
32
35
27
28
35
33
32
10
35
33
27
28
34
30
31
29
30
15
