TM 9--2350--292--20--2
0369 00--2
BRAKE CABLE REPLACEMENT -- CONTINUED
0369 00
Removal--Continued
7. Remove clamp (14), bushing (15) and electrical tiedown strap (16) from boot (17) and brake cable assembly (3).
Discard electrical tiedown strap.
8. Loosen two nuts (18), remove one nut (18) and ball joint (19) from threaded rod (20). Remove nut (18) from ball
joint (19).
9. Remove remaining nut (18) and ball joint (19) from brake cable assembly (3).
10. Remove nut (21) and washer (22) from brake cable assembly (3).
11. Remove two nuts (23), two lockwashers (24), four flat washers (25), two screws (26) and bracket (27) from ve-
hicle hull. Discard lockwashers.
12. Remove bracket (27), flat washer (28) and nut (29) from brake cable assembly (3).
13. Slide brake cable assembly (3) through bulkhead and boot (17) into engine compartment and remove from ve-
hicle.
14. Remove boot (17) from vehicle.
15. Inspect parts for damage and replace as required.
3
3
FORWARD
15
14
16
17
18
19
18
3
20
21
22
28
29
26
25
25
24
23
27
