FIXED FIRE EXTINGUISHER PULLEY RELEASE MECHANISM REPLACEMENT

FIXED FIRE EXTINGUISHER CYLINDER AND LINES REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1342

TM 9--2350--292--20--2 FIXED FIRE EXTINGUISHER PULLEY RELEASE MECHANISM REPLACEMENT 0702 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Lockwashers (2) (item 78, WP 0718 00) Gasket (item 114, WP 0718 00) Equipment Conditions Actuator cable assembly removed (WP 0699 00) Removal 1. Remove two nuts (1), two lockwashers (2), gasket (3) and pulley release mechanism (4). Discard lockwashers and gasket. 2. Inspect parts for damage and replace as required. Installation Install pulley release mechanism (4) with new gasket (3), two new lockwashers (2) and two nuts (1). Figure 369 4 3 1 1 2 2 NOTE FOLLOW--ON MAINTENANCE: Install actuator cable assembly (WP 0699 00) END OF TASK 0702 00--1/2 blank

Privacy Statement
Press Release
Contact