TM 9--2350--292--20--2
0703 00--3
FIXED FIRE EXTINGUISHER CYLINDER AND LINES REPLACEMENT --
CONTINUED
0703 00
Removal--Continued
WARNING
To prevent accidental discharge of CO2, remove diffuser
cap and piston cap from stowage plugs and install on the
cylinder assembly that is being removed. Failure to com-
ply may result in injury or death to personnel.
10. Install diffuser cap (22) on cylinder discharge port (23).
11. Install cap assembly (24) on cylinder safety disc (25).
NOTE
Cylinders are mounted in four brackets in groups of two.
To remove one cylinder, the adjacent cylinder must also
be disconnected. If removing the rear two cylinders, the
front two cylinders must be removed first.
12. Loosen six screws (26) on mounting bracket (27), remove two cylinders (2).
13. Inspect parts for damage and replace as required.
Installation
1. Position two cylinders (2) on mounting bracket (27).
2. Remove cap assembly (24) from cylinder safety disc (25), stow cap assembly (24) on plug.
3. Remove diffuser cap (22) from cylinder discharge port (23), stow cap assembly (24) on plug.
Figure 371
22
23
24
25
26
27
2
2
