TM 9--2350--292--20--2
0704 00--1
FIXED FIRE EXTINGUISHER CYLINDER MOUNTING BRACKETS AND
SUPPORTS REPLACEMENT
0704 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (16) (item 2, WP 0718 00)
Lockwashers (2) (item 35, WP 0718 00)
Equipment Conditions
Fire extinguisher cylinders removed
(WP 0703 00)
NOTE
There are four cylinder mounting brackets, two on the left
side and two on the right side. The procedures are the
same for left or right side.
There are two cylinder mounting bracket supports, one on
the left side and on the right side. The procedures are
the same for left or right side.
Removal
1. Remove two screws (1), two lockwashers (2) and retainer (3). Discard lockwashers.
2. Remove nut (4), lockwasher (5) and flat washer (6) from support (7). Discard lockwasher.
3. Slide brackets (8 and 9) from support (7).
4. Remove six screws (10), six lockwashers (11) and support (7). Discard lockwashers.
5. Inspect parts for damage and replace as required.
Figure 371
3
2
1
8
4
5
6
10
11
9
7
4
5
6
10
11
7
8
9
3
2
1