TM 9--2350--292--20--2
0706 00--4
M2A2 GAS PARTICULATE FILTER UNIT (GPFU), HOSE ASSEMBLIES,
FRAME ASSEMBLIES, BRACKETS, LEAD ASSEMBLY 4W303 AND
ASSOCIATED HARDWARE REPLACEMENT -- CONTINUED
0706 00
Removal--Continued
15. Disconnect wiring harness 4W306 connector P2 (29) from connector J1 (30) at M2A2 gas particulate filter unit
(31).
16. Remove nut (32), lockwasher (33) and lead assembly 4W303 (34) from M2A2 gas particulate filter unit (31). Dis-
card lockwasher.
17. Disconnect two hose assemblies (35) and hose assembly (36) from manifold of M2A2 gas particulate filter unit
(31).
NOTE
Do not remove wire rope assemblies from orifice connec-
tors, unless replacement of wire rope assemblies, or ori-
fice connectors is necessary.
18. Remove wire rope assembly (37) from orifice connector (38) if replacement of components is necessary.
19. Remove hose assembly (36) from clamp (39), remove screw (40), lockwasher (41), clamp (39) and wire rope as-
sembly (37) from frame assembly (42). Discard lockwasher.
20. Open catch (43) on frame assembly (42), remove M2A2 gas particulate filter unit (31) from frame assembly (42).
21. Remove five screws (44), five lockwashers (45), lead assembly 4W303 (34) and frame assembly (42) from ve-
hicle. Discard lockwashers.
Figure 374
FORWARD
29
31
30
40
41
39
42
44
45
43
36
35
32
33
34
34
45
44
31
37
38
