TM 9--2350--292--20--2
0387 00--5
SUSPENSION HUB ASSEMBLY REPAIR -- CONTINUED
0387 00
Assembly--Continued
13. Install gasket (17) and hub assembly (6) on suspension arm assembly (10) spindle and mate to seal assembly
(16).
14. Install outer bearing (12) and adjusting nut (11) on suspension arm assembly (10) temporarily for support.
15. Align and tighten four screws (14) to secure seal assembly (16) and gasket (17) to hub assembly (6).
16. Remove adjusting nut (11) and outer bearing (12) from suspension arm assembly (10).
17. Remove hub assembly (6) with seal assembly (16) from suspension arm assembly (10) spindle. Install remaining
four screws (14) and four new lockwashers (15). Torque screws to 20 -- 35 lb--ft (27.1 -- 47.5 NSm).
Figure 179
14
16
17
11
12
6
14
15
10
