TM 9--2350--292--20--2
0400 00--1
TRACK BINDER RETAINERS REPLACEMENT
0400 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Sealing compound (item 16, WP 0716 00)
Equipment Conditions
Armor skirt panels opened (TM 9--2350--292--10)
References
TM 9--2350--292--10
NOTE
There are four track binder retainers, one each located at
the left and right front and one each at the left rear and
right rear. All track binder retainers are replaced in the
same manner. This task replaces only one.
Removal
1. Remove three screws (1) and track binder retainer (2) from vehicle.
2. Inspect parts for damage and replace as required.
Installation
1. Apply sealing compound to threads of three screws (1).
2. Install track binder retainer (2) on vehicle with three screws (1).
Figure 189
A
B
C
2
1
2
1
2
1
FORWARD
FORWARD
A
B
C
B
ARMOR SKIRTS
REMOVED FOR
CLARITY
NOTE
FOLLOW--ON MAINTENANCE:
Close armor skirt panels (TM 9--2350--292--10)
END OF TASK
0400 00--1/2 blank
