TM 9--2350--292--20--20401 00--2STEERING CONTROL ASSEMBLY REPAIR -- CONTINUED0401 00Disassembly1. Remove proximity switch (17) (WP 0287 00).2. Remove cotter pin (18) and headed pin (19) from remote control lever (6). Discard cotter pin.3. Remove remote control lever (6) and spring (20) from steering column (21).4. Remove two cotter pins (22) and two flat washers (23) from headless pin (24). Discard cotter pins.5. Remove headless pin (24), bell crank (10), spring (25) and two spacers (26) from steering control housing (27).WARNING6. Remove retaining ring (28) and flat washer (29) from steering column (21). Discard retaining ring.7. Remove steering control housing (27) from steering column (21).8. Remove two lubrication fittings (30 and 31) from steering control housing (27).NOTEBearings and pins must be replaced if worn, pitted ordamaged bearings or pins are evident.9. Remove two pins (32 and 33) from steering control housing (27).10. Remove two bearings (34) from steering control housing (27).11. Inspect parts for damage and replace as required.Figure 192172134322731262329282018193025102422 232634336
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business