TM 9--2350--292--20--2
0401 00--1
STEERING CONTROL ASSEMBLY REPAIR
0401 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Retaining pliers set (item 15, WP 0717 00)
Materials/Parts
Cotter pins (5) (item 15, WP 0718 00)
Lockwashers (8) (item 2, WP 0718 00)
Retaining ring (item 16, WP 0718 00)
Equipment Conditions
Directional signal control switch removed (old
configuration) (WP 0267 00)
Directional signal control switch, dimmer switch and
bracket replacement (new configuration with brake
modulation) (WP 0268 00)
High beam indicator removed (WP 0249 00)
Passive night viewer indicator removed (WP 0266 00)
Removal
1. Disconnect two leads (1) from two connectors (2).
2. Remove cotter pin (3) and headed pin (4) from control tube (5) and remote control lever (6). Discard cotter pin.
3. Remove cotter pin (7) and headed pin (8) from locking rod clevis (9) and bell crank (10). Discard cotter pin.
4. Remove four screws (12), four lockwashers (13), bracket (14) and steering control assembly (11) from vehicle.
Discard lockwashers.
5. Remove four screws (15), four lockwashers (16) and steering control assembly (11) from bracket (14). Discard
lockwashers.
Figure 192
1
2
3
4
5
6
7
8
9
10
13
12
14
16
15
11
11
