TM 9--2350--292--20--20399 00--4TRACK ASSEMBLY REPLACEMENT -- CONTINUED0399 00Installation--Continued15. Carefully guide track assembly (1) over support rollers (8).16. When end of track assembly (1) has engaged drive sprocket (3), stop vehicle and remove fibrous rope (6) fromdrive sprocket (3), pull straight back on fibrous rope (6) and guide track assembly (1) over drive sprocket (3).17. Stop vehicle, lock brakes and shut engine off (TM 9--2350--292--10).18. Disconnect fibrous rope (6) from track assembly (1).19. Reconnect track assembly (1) (TM 9--2350--292--10). Torque two new externally released bolts to 180--200 lb--ft(244--271 NSm).20. Remove track binder (9) (TM 9--2350--292--10).21. Close armor skirt plates (TM 9--2350--292--10).22. Install fender (para 16--31).23. After 30--50 miles (48--80 km), retorque two externally released bolts to 180--200 lb--ft (244--271 NSm).13ARMOR SKIRTS REMOVED FOR CLARITY869END OF TASK
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business