TM 9--2350--292--20--2
0401 00--4
STEERING CONTROL ASSEMBLY REPAIR -- CONTINUED
0401 00
Installation
1. Install steering control assembly (11) on bracket (14) with four screws (15) and four new lockwashers (16).
2. Install steering control assembly (11) and bracket (14) in vehicle with four screws (12) and four new lockwashers
(13).
3. Connect locking rod clevis (9) to bell crank (10) with headed pin (8) and new cotter pin (7).
4. Connect remote control lever (6) to control tube (5) with headed pin (4) and new cotter pin (3).
5. Connect two connectors (2) to two leads (1).
6. Adjust steering locking rod assembly (WP 0058 00).
7. Lubricate steering control assembly (14) (WP 0187 00).
1
2
3
4
5
6
7
8
9
10
13
12
14
16
15
11
NOTE
FOLLOW--ON MAINTENANCE:
Install passive night viewer indicator (WP 0266 00)
Install high beam indicator (WP 0249 00)
Install directional signal control switch (old configuration)
(WP 0267 00)
Install directional control switch, dimmer switch and
bracket replacement (new configuration with brake
modulation) (WP 0268 00)
END OF TASK