TM 9--2350--292--20--2
0404 00--6
STEERING CONTROL LINKAGE (ENGINE COMPARTMENT) REPAIR --
CONTINUED
0404 00
Installation--Continued
7. Connect connecting link assembly (37) to bell crank (34) with screw (35) and new lockwasher (36).
8. Connect tube assembly (23) to bell crank (34) with screw (32) and new lockwasher (33).
9. Install mounting bracket (26) with screw (29), new lockwasher (30) and flat washer (31).
10. Install two screws (27) and two new lockwashers (28) in mounting bracket (26).
11. Install bell crank (20) in mounting bracket (26) with pin (25).
WARNING
12. Install new retaining ring (24) on pin (25).
13. Connect tube assembly (23) to bell crank (20) with screw (21) and new lockwasher (22).
Figure 194
21
22
23
20
25
35
36
37
34
32
33
31
26
28
27
24
30
29
FORWARD
