TM 9--2350--292--20--2
0427 00--4
HOIST BOOM REST AND LATCH ASSEMBLY REPAIR -- CONTINUED
0427 00
Installation
1. Install boom rest (5) on engine deck assembly with six screws (4), 12 flat washers (3), six new lockwashers (2)
and six nuts (1). Torque six screws (4) and six nuts (1) to 70--75 lb--ft
(94.9--102 N¯m).
2. Place boom on boom rest (5) (TM 9--2350--292--10). Loosen nut (19), adjust screw (18) until latch (10) is fully en-
gaged. Tighten nut (19).
Figure 205
1
2
3
3
4
5
19
18
10
END OF TASK