TM 9--2350--292--20--2
0443 00--6
FENDER REPLACEMENT -- CONTINUED
0443 00
Installation--Continued
NOTE
There are eight side fenders on each side of vehicle. The
procedures are the same for all except for the location
and length of screws used to attach tow cable retainer
clamps and fenders.
6. Install side fender (13) with four screws (10), four new lockwashers (12) and four flat washers (11).
Figure 219
10
11
12
10
12
11
13
7. Install fender (9) and plate (8) with three new lockwashers (7), three flat washers (6) and three screws (5).
8. Install front fender assembly (4) with three new lockwashers (3), three flat washers (2) and three screws (1).
Figure 221
4
2
3
1
5
7
6
9
8
NOTE
FOLLOW--ON MAINTENANCE:
Raise spade, if lowered (TM 9--2350--292--10)
Close rear skirt panel, if opened
(TM 9--2350--292--10)
Install tow cable, if removed (TM 9--2350--292--10)
END OF TASK