TM 9--2350--292--20--2
0444 00--5
COMMANDER’S CUPOLA REPAIR -- CONTINUED
0444 00
Assembly
1. Apply adhesive (item 18, WP 0716 00) to new nonmetallic seal (43) and nonmetallic seal mating surface of ring
assembly (10).
2. Install nonmetallic seal (43) on ring assembly (10).
3. Install latch (42), spacer (41) and two screws (40) on door (39).
4. Install handle (38) and new spring pin (37) on door (39).
5. Apply sealing compound (item 19, WP 0716 00) to six lock wedges (35) and mating surface of body assembly
(32).
6. Install six vision blocks (36), six lock wedges (35) and 12 screws (34) on body assembly (32). Torque 12 screws
to 84--120 lb--in (9--14 NSm).
WARNING
7. Secure 12 screws (34) with new nonelectrical wire (33).
8. Lower body assembly (32) on ring assembly (10).
Figure 223
10
32
33
34
35
36
37
38
39
40
41
42
43
