COMMANDERS CUPOLA REPAIR

Installation (cont) - TM-9-2350-292-20-2_441

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
410

TM 9--2350--292--20--2 0444 00--1 COMMANDER’S CUPOLA REPAIR 0444 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Lifting sling (item 25, WP 0717 00) Endless sling (item 23, WP 0717 00) Suitable lifting device (1500 lbs (681 kg) min cap) Torque wrench (item 2, WP 0717 00) Materials/Parts Lockwashers (30) (item 12, WP 0718 00) Nonelectrical wire (item 49, WP 0718 00) Lockwashers (8) (item 9, WP 0718 00) Lockwashers (17) (item 2, WP 0718 00) Spring pin (item 66, WP 0718 00) Nonmetallic seal (item 26, WP 0718 00) Adhesive (item 18, WP 0716 00) Sealing compound (item 19, WP 0716 00) Lubricant (item 3, WP 0716 00) Dry--cleaning solvent (item 1, WP 0716 00) Pressure sensitive tape (item 41, WP 0716 00) Sealing compound (item 42, WP 0716 00) Safety goggles (item 93, WP 0716 00) Solvent (item 91, WP 0716 00) Equipment Conditions Commander’s cupola door open (TM 9--2350--292--10) For Disassembly/Assembly only Personnel Required Three References TM 9--2350--292--10 NOTE Cupola mounting plate is removed for clearance in re- moval and installation of hydraulic reservoir, hoist winch, or electromagnetic clutch and main hydraulic pump or other interior items. It is not necessary to remove the cu- pola from the mounting plate. Remove plate with cupola mounted as an assembly, using lifting eyes. Perform Removal steps 1 and 2, Disassembly steps 14 and 15 and Installation steps 1 and 6 through 9 if cupola is being removed with mounting plate. Perform Removal steps 3, 4 and Disassembly step 15 and Installation steps 1 through 5 if cupola is being re- moved for maintenance.

Privacy Statement
Press Release
Contact