TM 9--2350--292--20--2
0444 00--4
COMMANDER’S CUPOLA REPAIR -- CONTINUED
0444 00
Disassembly--Continued
9. Remove body assembly (32) from ring assembly (10).
10. Remove nonelectrical wire (33), 12 screws (34), six lock wedges (35) and six vision blocks (36) from body assem-
bly (32). Discard nonelectrical wire.
11. Remove spring pin (37) and handle (38) from door (39). Discard spring pin.
12. Remove two screws (40), spacer (41) and latch (42) from door (39).
13. Remove nonmetallic seal (43) from ring assembly (10). Discard nonmetallic seal.
WARNING
14. Remove old sealing compound, clean all nonmetallic seal mating surfaces and components with solvent (item 91,
WP 0716 00).
15. Inspect parts for damage and replace as required.
Figure 223
10
32
33
34
35
36
37
38
39
40
41
42
43
