Removal - TM-9-2350-292-20-2

AUXILIARY POWER UNIT HYDRAULIC PUMP REPAIR

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
699

TM 9--2350--292--20--2 0547 00--2 AUXILIARY POWER UNIT HYDRAULIC PUMP REPAIR -- CONTINUED 0547 00 Removal--Continued 2. Remove two nuts (6), two lockwashers (7) and U--bolt (8) from bracket (9). Discard lockwashers. 3. Remove screw (10), lockwasher (11) and bracket (9) from APU assembly. Discard lockwasher. 4. Disconnect adapter (12) from adapter union (13). 5. Remove adapter union (13) and preformed packing (14) from pump (15). Discard preformed packing. NOTE Refer to disassembly procedures to further disassemble the removed fittings and hose on the input port side of the hydraulic pump. 6. Disconnect pipe elbow (16) from adapter (17). 7. Remove adapter (17) and preformed packing (18) from pump (15). Discard preformed packing. Figure 296 10 11 9 6 7 8 12 13 14 15 17 18 16

Privacy Statement
Press Release
Contact