TM 9--2350--292--20--2
AUXILIARY POWER UNIT CRANKCASE OIL DRAIN LINES REPAIR --
CONTINUED
0604 00
Installation--Continued
11. Install bracket (10) with two new lockwashers (12) and two screws (11).
12. Install tube assembly (5) in pipe elbow (13).
13. Install loop clamp (9) on bracket (10) with screw (6), new lockwasher (7) and nut (8).
14. Attach pipe nipple (4) to tube assembly (5).
15. Install pipe elbow (2) on pipe nipple (4).
16. Connect one end of hose assembly (1) to elbow at oil filler tube assembly (3).
17. Connect other end of hose assembly (1) to pipe elbow (2).
Figure 334
1
2
4
5
6
7
8
9
10
11
12
13
3
NOTE
FOLLOW--ON MAINTENANCE:
Install APU saber gauge (WP 0598 00)
Fill APU crankcase with oil (WP 0187 00)
Install APU engine support (WP 0591 00)
END OF TASK
0604 00--5/6 blank