TM 9--2350--292--20--2
0603 00--2
AUXILIARY POWER UNIT CRANKCASE OIL FILL LINES REPLACEMENT
(HATZ) -- CONTINUED
0603 00
Installation
1. Apply adhesive (item 25, Appx C) to each side of new gasket (10).
2. Apply adhesive (item 29, Appx C) to threads of screws (5 and 6).
3. Install oil filler assembly (9) on APU assembly with gasket (10), two screws (6), two screws (5), four flat washers
(8), four new lockwashers (7) and two nuts (4). Torque screws 20--22 lb--ft (27--29.8 NSm).
4. Secure oil filler cap assembly (3) to APU with screw (1) and flat washer (2).
5
7
8
6
7
8
3
9
10
1
2
4
NOTE
FOLLOW--ON MAINTENANCE:
Fill APU crankcase with oil (WP 0187 00)
Install APU cover (WP 0413 00)
END OF TASK
