TM 9--2350--292--20--2
AUXILIARY POWER UNIT CRANKCASE OIL FILL LINES REPLACEMENT
CONTINUED
0602 00
Installation
1. Apply sealing compound to all pipe threads prior to installation.
2. Install elbow (7) on oil filler tube assembly (4).
3. Apply adhesive to each side of new gasket (13). Install oil filler tube assembly (4) on APU assembly with gasket
(13), two screws (11) and two new lockwashers (12).
4. Connect hose assembly (8) to oil filler tube assembly (4).
5. Connect other end of hose assembly (8) to fuel injection pump (not shown).
6. Install elbow (10) on oil filler tube assembly (4).
7. Install coupler (9) on elbow (10).
8. Connect hose assembly (5) to elbow (7). Connect other end of hose assembly (5) to elbow (6).
9. Install screw (1), new lockwasher (2) and clamp (3) to hold oil filler tube assembly (4).
Figure 334
1
2
3
5
4
13
7
8
12
11
9
10
6
NOTE
FOLLOW--ON MAINTENANCE:
Fill APU crankcase with oil (WP 0187 00)
Install APU in vehicle (WP 0586 00)
END OF TASK
0602 00--3/4 blank